☩DIY☩ Viktor & Rolf Red and Black Booties

Things you need for this DIY:

✝ patent leather platform booties (get a pair here)

✝ red acrylic paint

✝ painter's tape

✝ a good flat paint brush

 

 

Total time:

3 hours

viktor and rolf diy web.jpg
photo web.jpg
00540m.jpg

My old patent oxfords have seen me through a few winters and lots of puddles, they were looking shab-city. I saw these Viktor & Rolf shoes after last seasons runway show and would have given my first born for them, had I had a first born...it's a good thing I don't have kids yet.

photo-6web.jpg

To get the color right I mixed cadmium deep and vermillion.

photo-3web.jpg

You need LOTS of paint.

photoweb.jpg
photo-4web.jpg

You need a lot of coats. I did about 20. The more the better, too thin will chip off. Make sure you let each layer dry before the next coat. This is after one...

photo-7web.jpg

Be careful when you take the tape off, it's a good idea to have something with a sharp edge in case the tape starts to pull the paint.

photo-5web.jpg

I also painted about 1.5 inches in the middle of the shoe lace.

viktor and rolf diy web.jpg

That's it!

viktor and rolf diy 2 web.jpg